It is used for low-power machines. The table with This car moves through the gears and it is firmly attached to the bottom of the table.
The countershaft is powered by the engine from the top of the residential building has 2 pulleys to transmit power to the main shaft, so that the gearbox, table, and cabinet. The two sets of fast and slow disks are mounted on the drive shaft. Rapid roll is controlled by a button, the shaft, while the single roll, you may be able to turn freely on the shaft. A quick, small winch, which will be used for the reversal of the movement of the table and is connected to an open belt drive. How to speed up the roll, which is used for the direct-to-table movement, was the larger and is driven by a cross position. Therefore, the speed of the table, while the return was faster than that on a live broadcast (for a total).?????????? The tape is used for the table during the cutting process. At the end of the cut by one stroke, with the cross straps on to the fast pulley is a freeroll, while the open band is part of the freeroll onto the fast pulley. This is achieved by using a trip dog that drives the belt, the gear lever. The direction of travel is automatically changed in the other direction, and the machine is powered by a fast-reverse pulley at a much higher rate of speed. The length and the position of the shoulder blade can be adjusted by changing the position of the dog.
0 Comments