The barrel-axis lathe, a ram-type turret lathe, which is the hexagonal turret head is mounted on the ram slider. The saddle is supported by the ram, tied to the bed in the position that you want. This lathe is a lightweight design and features a short-stroke, towers, and an auto-pointer on top of the tower. The movement of the tower, which is determined by the length of the RAM which varies from 100 mm to 375 mm). Lathes are used for the production of medium-sized parts of the rods, and the rod of the material.
1. Double Bed with mattress is a long-copy, which is equipped with a local guide. Support Instagram Instagram-head stem, Instagram tower, and Instagram-traction slide.
2. Title: the heart of the functioning of the brain's control of the motor speed. With a full focus head, the head is common, and it offers a wide range of speeds and more heavy-duty cuts. Located on the left-hand side of the bed. An I-bar across the top of the head, which gives them strength and the supporting tools for precise control. It is engaged in the hole in the knee joint-holder."
3. Turn heads with This, it is a snap-in, the holding device is made in the shape of a hexagon, and is mounted on a ram (tools bar). Especially designed tools are linked to the six faces of a hexagonal tower, and have been for several activities. The instruments that were used in the tower of drill bits, reamers, boring, boards, and tools. A set screw is provided for each of a set of tools for the monitoring of the movement of the tool.
4. He's not carrying a chair that Extra push in the chair) : The gun, coupling device, the ram (the electric sliding door on top of the hexagonal turret head is mounted on it. The turn of the saddle can be moved out of the bed and stays in any position.
5. The Cross-slide, and the trolley: a cross-sectional view of the slide that has been installed on the trolley. It is equipped with a pillar, the type 4, the drive, the tools are on the front and backside to write the tool in the back end of the car is skidding. It is used for the faces, shapes, and cut the bars of the material. It can be used at the same time as the main menu. It will be two different cuts (operations) at the same time.
The chest can be reached by a bridge-type) has been installed throughout the room. It operates in parallel with the lathe bed. The cutting tool is put to work on the move, in the car, to enable the plane) and along the bed, and sliding it across the bed.
0 Comments